Environmental Lab Equipment

Most versatile & highly reliable low temperature incubator, to make Biochemical Oxygen Demand determinations and for preservation of vaccines, chemicals, etc. Double walled. Inner chamber stainless steel, outer mild steel, duly powder coated, insulation between inner and outer chamber 75mm filled with high grade glass wool. Body rests on caster wheels. Double door chamber, inner door made of Perspex transparent sheet, lock provided on the outer door. Unit is fitted with illuminated lamp inside the chamber. Three shelves. Temp range from 5 °C to 50 °C, accuracy ± 1°C. Fitted with digital temperature controller and an air circulating blower to keep uniform temperature inside the chamber.

Available in following chamber sizes

• 4 cubic feet approx (18 x24 x 16” approx)
• 6 cubic feet approx (20 x 34 x 17” approx)
• 10 cubic feet approx ( 24 x 33 x 20” approx)
• 12 cubic feet approx (24 x 36 x 24” approx)

Fitted with digital temp controller, timer for 2 hours and buzzer. Consists of reaction vessel 38-40 mm. Temp. range from 5 °C above ambient to 150 °C ± 1 °C. Complete with Glass reactions vessels and Air condensers. Supplied complete with stand to accommodate vessels. To operate on 230 volts, 50 Hz, Single phase

Available in models

• Suitable for 15 samples
• Suitable for 6 samples

Used for uniform stirring of samples. The unit is provided with speed regulator for variable speed, S.S. Stirring shafts with adjustable height, S.S. propeller, and tube light is provided at base for illumination. Six Test Set, for 1 lit capacity. (without Glassware)               

Optional for above

• Mechanical Timer, 0 – 60 minutes  or  Digital Timer, 0 – 99 minutes
• Digital RPM Indicator

Inner chamber made of S.S. Sheet, Outer body mild steel duly powder coated. Temperature range from 50° to 200??C. Gap between the two walls is filled with glass wool insulation. Thermostatically controlled.

Optional for above

• Digital temperature indicator cum controller
• Air circulation blower

Available in following chamber sizes

• 12 x 12 x 12”
• 14 x 14 x 14”
• 18 x 18 x 18”
• 18 x 18 x 24”
• 24 x 24 x 24”
• 24 x 24 x 36”

It is a method for the quantitative determination of nitrogen in chemical substances Two sets of heating platforms-one for distillation and one for digestion. Works on 220/230 volts A.C. supply. Equipped with mild steel tubular stand. Individual energy regulators are provided for each heating mantle.

Models Available -

• 3 Test Set
• 6 Test Set

Models Available -

• U.V./VIS Spectrophotometer
• Digital Spectrophotometer

UV/VIS Spectrophotometer - (Single Beam), Range 195 to 1000nm. 4 Digit LCD display. Spectral Bandwidth 2nm, Accuracy ± 0.5nm. Photometric Range : Percentage Transmission 0 to 100%, Absorbance 0 to 1.999, Concentration 0 to 1999, K factor 0 to 1.999. Single line LCD display. Printer interface for any Centronics dot matrix printer (RS 232 interface). Unit is fitted with Tungsten halogen lamp, Deuterium Lamp (D2) and wide range Silicon Photodiode detector. 4 position adjustable sample holder. Suitable for operation on 230 Volts Single phase power supply.

Above Model of UV/VIS Spectrophotometer also Available in Double beam variant.


Digital Spectrophotometer - (Dual Display), Range 340-960nm. Resolution – Percentage Transmission 0.1 %, Absorbance 0.001, Concentration 1. Output – Percentage Transmission 0 to 100%, Absorbance 0 to 1.999, Concentration 0 to 1999. Silicon Photodiode detector and Tungsten Halogen Lamp. High performance holographic grating system. Spectral Bandwidth 5nm, Wavelength resolution 1nm, Wavelength accuracy ± 2.5nm. 3½ Digit (Data) & 3½ Digit (Wavelength) LED Display. Suitable for operation on 230 Volts Single phase power supply.

Above Model of Digital Spectrophotometer also Available in single beam variant.

Digital pH Meter (Table Model). 4 digit LED display, Range 0-14 pH, resolution 0.01 pH, accuracy ± 0.01 pH ± 1 digit. Power supply 230 volts single phase

Models Available -

• Manual Temp. Compensation
• Automatic Temp. Compensation
• Automatic Temp. Compensation with temp. indication

We are providing our clients with a assortment of Turbidity Meter that is used for testing the turbidity of drinking water and sewage disposal water. Further, these are precisely manufactured to give high accuracy and optimum performance. Additionally, this Turbidity Meter is provided with led display. Our product can be availed at highly competitive prices.

Digital Turbidity Meter (Table Model) 4 digit LED display. Range 0 – 200, 1000 NTU/JTU. Resolution 1 NTU/JTU.

Digital conductivity meter (table model) 4 digit LED display, range 0 to 1000 ms (200u, 2m, 20m, 200m & 1000m. Complete with conductivity cell.

Models Available -

• Manual Temp. Compensation
• Automatic Temp. Compensation
• Automatic Temp. Compensation with temp. indication

Digital TDS Meter (Table Model) 4 digit LED display, Range 0-200u, 2m, 20m, 200m, 1000m

Models Available -

• Manual Temp. Compensation
• Automatic Temp. Compensation
• Automatic Temp. Compensation with temp. indication

Digital D.O. Meter (Table Model) Range 0-20 PPM, Resolution 0.1 PPM, accuracy 0.2 PPM ± 1 digit, temp range 0-100°, complete with D.O. probe, temperature probe, and 30nos D.O. membranes.